So this morning I went for my first group ride since the fires, and it turned out to be pretty dramatic. We took a different route that kept us away from where the fire had been just last week. Visibility was poor, thankfully due mainly to fog... I hope. At any rate, at one point in the ride, a dude sort of went real fast on a downhill to catch up to some homies up the road, and kept drilling it. Another dude on the ride wasn't too happy about this, and after coming back together in a mile or two, they started exchanging words. It was pretty unsafe how the first guy rolled off... sort of rode right through a group on a narrow road with poor visibility.... but what transpired was still flipping crazy.
They started exchanging more words, and even smacking each other on the helmet. Numerous times people said "come on ladies" or something to that effect to try and prevent the fight, in the presence of some women on the ride who probably thought... well fuck you! Then at a stop light, all hell broke loose. Full on swings, head locks.. you name it. Both of them laid their bikes on the pavement and went at it. It was so very middle school.
So if you're ever on a group ride in SoCal, don't fuck with a dude in a Disco kit. He really does ride for Disco... maybe he's just mad that his team is gone...
Tuesday, October 30, 2007
Monday, October 22, 2007
Training this week?
Probably not. I'm already taking off Friday - Sunday to go visit the Big Apple, which I'm psyched for. I'll be doing a good bit of work this week, catching up so I won't have to do a lot this weekend... but I still planned to do some riding this week until this happened....

D'oh! I usually climb up and over that ridge and ride through the canyon on the other side. But I can't even ride anywhere else around here because the air quality is atrocious. So hopefully these will clear up a bit by the time I have to take off from Long Beach on Thursday afternoon...
If you're bored check this site out. Shows all the fires, though its not updated all that often.

D'oh! I usually climb up and over that ridge and ride through the canyon on the other side. But I can't even ride anywhere else around here because the air quality is atrocious. So hopefully these will clear up a bit by the time I have to take off from Long Beach on Thursday afternoon...
If you're bored check this site out. Shows all the fires, though its not updated all that often.
Sunday, October 21, 2007
Damn Cross (UCI #2)
So today was the same race as yesterday. Some changes were supposed to be made to the course, but they weren't, but that was ok because there wasn't much that could be done to make the course any better, given the location with all the gopher holes anyway...
It was my cleanest cross race so far, and not surprisingly I got my best result, both due to that fact, and some poor luck of folks in front of me (that's cross!). So right from the gun I was in 2nd position, but couldn't hold the fast pace up the first grade, and got gapped a bit. 4 leaders with a 5-10 second lead, then me with another two guys. That was basically the scenario until the series leader, and my teammate Ted, who were both in that front group of 4, both had mechanicals. The leader got a flat, but had to ride a little bit to get to the pit before changing and getting back in- he would up just inside the top 10. Ted was a bit more unfortunate. He rolled his tubular front tire after hitting an odd corner, but was able to ride the wheel into the pit and get his spare, which he then flatted somewhere in the next lap or so. Bummer because he was looking REAL good up with the leaders.
Those two mishaps and I'm sure some surges a the front, broke everything apart. I was well behind the two riders up the road, with two different guys coming up towards me. One guy faded, and one guy made his way up to me. I punched it real hard going into the last lap, and he spent the whole rest of the lap clawing his way back to me. He then flatted trying to hop the curb to ride the last runup, so I had an easy ride in for 3rd.
Really looking forward to the next few races... next one is in two weeks, so I'll be on the road again for a bit...
It was my cleanest cross race so far, and not surprisingly I got my best result, both due to that fact, and some poor luck of folks in front of me (that's cross!). So right from the gun I was in 2nd position, but couldn't hold the fast pace up the first grade, and got gapped a bit. 4 leaders with a 5-10 second lead, then me with another two guys. That was basically the scenario until the series leader, and my teammate Ted, who were both in that front group of 4, both had mechanicals. The leader got a flat, but had to ride a little bit to get to the pit before changing and getting back in- he would up just inside the top 10. Ted was a bit more unfortunate. He rolled his tubular front tire after hitting an odd corner, but was able to ride the wheel into the pit and get his spare, which he then flatted somewhere in the next lap or so. Bummer because he was looking REAL good up with the leaders.
Those two mishaps and I'm sure some surges a the front, broke everything apart. I was well behind the two riders up the road, with two different guys coming up towards me. One guy faded, and one guy made his way up to me. I punched it real hard going into the last lap, and he spent the whole rest of the lap clawing his way back to me. He then flatted trying to hop the curb to ride the last runup, so I had an easy ride in for 3rd.
Really looking forward to the next few races... next one is in two weeks, so I'll be on the road again for a bit...
Saturday, October 20, 2007
UCI (not UC Irvine) cross, #1
Cross racin.... pegged to 185 from the beginning, kept up there for nearly 45 mins, with a max at 195. Sahweet.

This weekend was the first ever UCI weekend for Southern California. UCI in terms of cycling has nothing to do with UC Irvine, for those of you wondering.... Union Cycliste Internationale is the global governing body for cycling- a UCI race usually means big names will show up, and the promoter will loose lots of money because they have to pay the commissaries a billion swiss francs per hour.
Anyway, none of that really matters for my Cat 3/4 races, so it was just a normal race. Attendance was actually a little low unfortunately, only about half of the top 10 on the series were present, so that was a bummer, but a good chance to move up I guess. I was 11th in the series going into the race, so no call-up, but that didn't matter much. I punched it hard on the opening paved section and cruised up the first big hill, and got into 3rd. My buddy Ted had the misfortune of unclipping on that hill, and lost a few spots, but he was quickly back up near the front. In the early parts of the first lap I did my usual first lap crash, just sliding out (despite the new tubies!). This not as bad as last week though, and I was able to quickly get back up, only losing 3-4 spots. After a few laps most of the race had shaken out, and the two leaders were well up the road, Ted was in 3rd, I was in 4th, and there were a few riders looking to come up, who never quite made it. I don't think I would have placed any differently had I not crashed. Maybe I would have been there when the guys took off and made their gap (my crash may have been what caused their initial gap....) but I don't think I would have hung with, and may have even blown up, so maybe it's a good thing.
So I should be looking at a callup for tomorrow's race, which I hope will feature more people, especially more from the top 10 who had been handing to us pretty well the first few weeks.
This weekend was the first ever UCI weekend for Southern California. UCI in terms of cycling has nothing to do with UC Irvine, for those of you wondering.... Union Cycliste Internationale is the global governing body for cycling- a UCI race usually means big names will show up, and the promoter will loose lots of money because they have to pay the commissaries a billion swiss francs per hour.
Anyway, none of that really matters for my Cat 3/4 races, so it was just a normal race. Attendance was actually a little low unfortunately, only about half of the top 10 on the series were present, so that was a bummer, but a good chance to move up I guess. I was 11th in the series going into the race, so no call-up, but that didn't matter much. I punched it hard on the opening paved section and cruised up the first big hill, and got into 3rd. My buddy Ted had the misfortune of unclipping on that hill, and lost a few spots, but he was quickly back up near the front. In the early parts of the first lap I did my usual first lap crash, just sliding out (despite the new tubies!). This not as bad as last week though, and I was able to quickly get back up, only losing 3-4 spots. After a few laps most of the race had shaken out, and the two leaders were well up the road, Ted was in 3rd, I was in 4th, and there were a few riders looking to come up, who never quite made it. I don't think I would have placed any differently had I not crashed. Maybe I would have been there when the guys took off and made their gap (my crash may have been what caused their initial gap....) but I don't think I would have hung with, and may have even blown up, so maybe it's a good thing.
So I should be looking at a callup for tomorrow's race, which I hope will feature more people, especially more from the top 10 who had been handing to us pretty well the first few weeks.
Tuesday, October 16, 2007
Greenhouse Dollars
... no greenhouse dollars are not things that Republicans spend on the free market in order to fund the military by buying Haliburton contracts while also pissing off Al Gore.
They are a form of free money disseminated by the University (UC Irvine). One of my buddies Dave told me today that if you work for the University (which graduate students do) and you do not have a parking permit for parking on campus, then you are eligible to receive 10 greenhouse bucks for each month, meaning $90 for us right now. These can be used at the bookstore, or any place on campus to get food. So obviously we marched right over to get burritos with Dave's money, then walked over to get myself some "wad of cash".
Today just got a lot better... I have "85 dollars" burning a hole in my pocket. I'm trying to figure out the most efficient way for this money to make its way onto my bike. I think the best way may be to shop around on half.com for a book that is selling for a decent amount of its retail value, and then try and buy it at the store, and sell it quickly online. Though I fear my timing for this might not be that great... with quarters starting later than other schools, and the fact that we are a third of the way through this quarter...
I don't really want to use the money for food on campus.... I mean my last post was an excel spreadsheet screen shot depicting how I'm counting calories. Seriously.
Suggestions are welcome. If you wish to suggest I wait and use it for my textbooks for next quarter, then don't even bother responding, that is deplorable. This is FREE MONEY.
They are a form of free money disseminated by the University (UC Irvine). One of my buddies Dave told me today that if you work for the University (which graduate students do) and you do not have a parking permit for parking on campus, then you are eligible to receive 10 greenhouse bucks for each month, meaning $90 for us right now. These can be used at the bookstore, or any place on campus to get food. So obviously we marched right over to get burritos with Dave's money, then walked over to get myself some "wad of cash".
Today just got a lot better... I have "85 dollars" burning a hole in my pocket. I'm trying to figure out the most efficient way for this money to make its way onto my bike. I think the best way may be to shop around on half.com for a book that is selling for a decent amount of its retail value, and then try and buy it at the store, and sell it quickly online. Though I fear my timing for this might not be that great... with quarters starting later than other schools, and the fact that we are a third of the way through this quarter...
I don't really want to use the money for food on campus.... I mean my last post was an excel spreadsheet screen shot depicting how I'm counting calories. Seriously.
Suggestions are welcome. If you wish to suggest I wait and use it for my textbooks for next quarter, then don't even bother responding, that is deplorable. This is FREE MONEY.
Monday, October 15, 2007
I'm a dork....
So I dig excel graphs for some reason, don't ask. Spent a little too much time on this guy....Net calories calculated from basal metabolic rate (calculated to be 2700 KCal per day), my Polar output in KCal, and my food intake, estimated to within a few hundred probably. Not that I'm really manging my eating/training habits off this, but I think it might be kind of cool to watch how it goes.... Interesting at least. I've already noticed that I'll spike at least 1.5 to 2 lbs for a day or two after a hard ride (and presumably eating more, I just started "counting" calories now)... then it'll settle down in a few days. Sort of cool... body has a large time constant.

So spoiled...
So I was taking a look at the flyers for this weekend's double header of cross action, and I was thinking to myself... MAN I don't want to have to make this drive twice! An hour and fifteen minutes each way!? That sucks....

Then I remembered back in the day in good ole Pennsylvania where I would have driven about 4 hours to race.... damn I'm getting spoiled out here already. I'm already sulking the fact that I need armwarmers and kneewarmers to ride in the morning... wazup with that?
Then I remembered back in the day in good ole Pennsylvania where I would have driven about 4 hours to race.... damn I'm getting spoiled out here already. I'm already sulking the fact that I need armwarmers and kneewarmers to ride in the morning... wazup with that?
Saturday, October 13, 2007
Major Jake, ready for deployment...
So the Kona is finally done up right. As I said before, the cross rig now features sram rival 10spd drivetrain, paul's touring cantis, and tubular race wheels (though I only have one 10 spd cassette that is crossworthy, so these will basically be training and race wheels). As shown, comes in at 18lbs. Legit!!




Yes, I'm a dork for making up that picture. Excuse me while I go spend my Saturday evening recovering from a 90mile road ride by coding matlab and watching the documentary "Who Killed the Electric Car".
The front end... featuring the extra brake levers that I have not used much since I've gotten used to being on the hoods / in the drops
Paul's brake calipers. Sexy.
They feel just as nice as they look. I promise this bike won't be clean in one weeks time... have two races next weekend...
The picture below shows an extra washer I had to put in so that the calipers would work properly. The problem was that with certain calipers, there was an inordinate amount of torsional friction, which would not even be compensated for with high spring tension (which would have felt weird anyway). So it took a few days, a phone call and a few emails with Paul himself to get to the bottom of it. Actually Paul didn't know what was wrong (hard without see it)... it took me taking the calipers apart numerous times to realize what was happening. What happened was that if you accidentally overtighten the bolt without holding the nut the caliper down on the post on the frame / fork, then the sleeve, which is slid on top of the post, is pushed onto the flats (further than it was designed to go) and therefore allows the spring mechanism to be squished. Now this could have been avoided if AlphaQ and Kona had made the flats on these parts larger than the shank of the post, but that would be hard to fix now.... so what I did was add an additional washer to make sure the caliper didn't push the sleeve up onto the flats. Might be easier to see what I mean...
For those of you who don't know what the heck is going on, then you might not realize how Paul's brakes work, which I didn't either before buying them. It is actually really cool - they do not use the typical tabs which lock the torsional spring into place (in fact I took them out on the fork). The springs are held between the caliper itself and the nut that the mount bolt goes through. A really cool design, that you really need to see to get your head around I think, and even then it took me a while to realize what was going wrong with my particular installation.Yes, I'm a dork for making up that picture. Excuse me while I go spend my Saturday evening recovering from a 90mile road ride by coding matlab and watching the documentary "Who Killed the Electric Car".
Wednesday, October 10, 2007
Pictures....
Eatin' good in the neighorhood
So I've been making a conscious effort to really watch what I've been eating the last few months. It's been sloooowly paying off (I'm down to about 165 on good days now). I've basically had a veeery simple diet:
Breakfast:
cereal, bannana, OJ
Lunch:
sandwich, carrots, apple, couple cookies
Dinner:
salad, pasta or stirfry
Snack:
yogurt with pretzels (don't knock it until you try it... but be ready to be addicted people).
Anyway, my main point is that today I was coming home from cross practice, and I stopped at Subway. Got a chicken bacon ranch on the cheesy bread. Not the best of choices, but I had just put in a good cross workout, and I was hungry. Probably the first "greasy" food I'd had in a while. I used to eat these things all the time... but let me tell you... I was not ready for the chaos this would have on me... I felt like I had just eaten a Big Mac or something!! I think I really got my body off the greasy food, and it didn't like going back.
Tomorrow, breakfast is oatmeal.
I'll also be posting some pics soon of new completly overhauled Kona Major Jake. Sram Rival 10spd group. Paul's touring cantis (funny story about these, and Paul himself later), and a new appropriately used left non-sti brake lever (instead of a right one). It feels faaaaaast.
Breakfast:
cereal, bannana, OJ
Lunch:
sandwich, carrots, apple, couple cookies
Dinner:
salad, pasta or stirfry
Snack:
yogurt with pretzels (don't knock it until you try it... but be ready to be addicted people).
Anyway, my main point is that today I was coming home from cross practice, and I stopped at Subway. Got a chicken bacon ranch on the cheesy bread. Not the best of choices, but I had just put in a good cross workout, and I was hungry. Probably the first "greasy" food I'd had in a while. I used to eat these things all the time... but let me tell you... I was not ready for the chaos this would have on me... I felt like I had just eaten a Big Mac or something!! I think I really got my body off the greasy food, and it didn't like going back.
Tomorrow, breakfast is oatmeal.
I'll also be posting some pics soon of new completly overhauled Kona Major Jake. Sram Rival 10spd group. Paul's touring cantis (funny story about these, and Paul himself later), and a new appropriately used left non-sti brake lever (instead of a right one). It feels faaaaaast.
Sunday, October 07, 2007
More Crossin
Did the 4, and the 3/4 today at the second race in the Cross series out here. The first race went pretty well, got 3rd place, and my future teammate took the first lap by storm and never got caught. The race split up very quickly, and after about 10 minutes in, I was battling with one other guy for 2nd... so it was a good result, but it wasn't the most competitive or anything. There were a decent amount of guys there... just blew to pieces real quick I guess.
The second race wasn't quite a race for me. I got the last callup spot from my 10th place finish last week, and got a decent start, into about 4th or 5th in the beginning of the first lap. My bud Ted dropped his chain over the barriers, and myself and at least 5 or 6 others flew by. I was pretty amazed when, about a minute later, he came absolutely flying by me... I mean totally different speed. Impressive, too bad he dropped his chain again, but still ended up 10th. We're going to get that 3rd eye chain watcher adjusted...then look out. As for my race... I slid out in a corner over some pine needles in one corner, and being a little too frantic to catch back on, overcooked a fast downhill grassy corner and landed pretty hard. I was a little shook up, but probably would have ridden it out, but my shifter was on the fritz.... so not even one lap into the 3/4, I was just hobbling back to get changed back into civilian clothes. Bummer.
Good news though, is that I have a new shifter, brake calipers and tubular tyres (if you are talking about cross tubulars, they are tyres, not tires, bitches) coming... so this cross bike is going to be raging.... just need to get more comfortable taking turns at speed... still feeling overall better each time on the bike though, and it's still fun as heck...
The second race wasn't quite a race for me. I got the last callup spot from my 10th place finish last week, and got a decent start, into about 4th or 5th in the beginning of the first lap. My bud Ted dropped his chain over the barriers, and myself and at least 5 or 6 others flew by. I was pretty amazed when, about a minute later, he came absolutely flying by me... I mean totally different speed. Impressive, too bad he dropped his chain again, but still ended up 10th. We're going to get that 3rd eye chain watcher adjusted...then look out. As for my race... I slid out in a corner over some pine needles in one corner, and being a little too frantic to catch back on, overcooked a fast downhill grassy corner and landed pretty hard. I was a little shook up, but probably would have ridden it out, but my shifter was on the fritz.... so not even one lap into the 3/4, I was just hobbling back to get changed back into civilian clothes. Bummer.
Good news though, is that I have a new shifter, brake calipers and tubular tyres (if you are talking about cross tubulars, they are tyres, not tires, bitches) coming... so this cross bike is going to be raging.... just need to get more comfortable taking turns at speed... still feeling overall better each time on the bike though, and it's still fun as heck...
Sunday, September 30, 2007
Cross Race #1 in the bag
Did my first cross race this weekend, and it was pretty sweet. Was only about a half hour drive, up in Fullerton. It was basically an all grass course, which makes it slow and hard... but since I did the 3/4 which was the last race on the 2nd day of racing, there was a beaten down path in the middle of the course which made it much faster than my trial runs on it before the elite race the day before.
I started in the 2nd row, and was probably about 10th through the first turn and into the first set of barriers. By the end of the first lap I had worked up to 6th or so, feel pretty good. My highest position was 5th, which I held for a lap, despite skidding out around one corner. My big mishap came on a concrete slab before a few stairs. I think that I didn't get my left cleat unclipped all the way before I started to lean over to start running, and both myself and the bike went down. Picked the bike up, but when I put it back down on top of the grass, the rear wheel was locked down. Damn. The canti caliper had been jammed down past the rim, and I needed to nail it back over with my hand. Took only about 15 seconds, but I lost about 10 places in the process. I was pretty bummed, and went real easy the next lap and a half, feeling like the race was all but over, but I managed to find some motivation to suffer a bit more, and over the last two laps made a bunch of places up as people were hurting to come back and secure a 10th.
All in all a good race. I just ordered some better calipers (not that they were really at fault for the rear wheel lockup) but they do suck, despite being orange. Also planning on making some spare tubie wheels into cross wheels if I can do it cheaply enough. They are box section rims, so I might beat them up a bit, but the cross riding out here isn't too terribly tough, so I hope to be able to use them so I can run tubies. I'll post some pictures later on if the photographer uploads them online.....
Next weekend, look out for another top 10.... hopefully.
I started in the 2nd row, and was probably about 10th through the first turn and into the first set of barriers. By the end of the first lap I had worked up to 6th or so, feel pretty good. My highest position was 5th, which I held for a lap, despite skidding out around one corner. My big mishap came on a concrete slab before a few stairs. I think that I didn't get my left cleat unclipped all the way before I started to lean over to start running, and both myself and the bike went down. Picked the bike up, but when I put it back down on top of the grass, the rear wheel was locked down. Damn. The canti caliper had been jammed down past the rim, and I needed to nail it back over with my hand. Took only about 15 seconds, but I lost about 10 places in the process. I was pretty bummed, and went real easy the next lap and a half, feeling like the race was all but over, but I managed to find some motivation to suffer a bit more, and over the last two laps made a bunch of places up as people were hurting to come back and secure a 10th.
All in all a good race. I just ordered some better calipers (not that they were really at fault for the rear wheel lockup) but they do suck, despite being orange. Also planning on making some spare tubie wheels into cross wheels if I can do it cheaply enough. They are box section rims, so I might beat them up a bit, but the cross riding out here isn't too terribly tough, so I hope to be able to use them so I can run tubies. I'll post some pictures later on if the photographer uploads them online.....
Next weekend, look out for another top 10.... hopefully.
Monday, September 24, 2007
Stealing some thunder
So Andy sent me a cool link today about a dual drive "fixed" gear. The question we had, though, was whether the gear ratio had to be the same for both sides. In case you are too lazy to read the link, the setup is basically two front chainrings, with chains running parallel back to two FREEWHEELS on either side of the rear hub. (if its two fixed gears the answer is much simpler)
I believe that the gear ratios can be different. I thought about it this way:
If the two concentric circles are the two chainrings, and the two cogs on the outside are the rear cogs. Because they freewheel in opposite directions, they cannot produce torque against each other, so they have no physical mechanism that connects their motion.... so I drew it this way to make it more clear. Obviously the two gear ratios above are different.
So clearly the angular velocity has to be the same for both chainrings, being constrained by the bottom bracket. But if you then express the cogs' angular velocities through the gear ratios, you see that the only way that omega2 = omega1 is if r2/r3 = r1/r4, or if the gear ratios are the same.
Physically, if you had a big gear for going forward, and a small gear for stopping, or going backward, then the whole time you are moving forward, the other freewheel (on the non-drive side, or I should say the left) will be freewheeling like crazy, but because its going backwards it shouldn't matter. If you get a cheap freewheel like I have on my single speeds, then it might sap a few watts out though!
Anyway, if you disagree with my conclusions, let me know... I'd be curious if anyone sees this differently...
I believe that the gear ratios can be different. I thought about it this way:
So clearly the angular velocity has to be the same for both chainrings, being constrained by the bottom bracket. But if you then express the cogs' angular velocities through the gear ratios, you see that the only way that omega2 = omega1 is if r2/r3 = r1/r4, or if the gear ratios are the same.
Physically, if you had a big gear for going forward, and a small gear for stopping, or going backward, then the whole time you are moving forward, the other freewheel (on the non-drive side, or I should say the left) will be freewheeling like crazy, but because its going backwards it shouldn't matter. If you get a cheap freewheel like I have on my single speeds, then it might sap a few watts out though!
Anyway, if you disagree with my conclusions, let me know... I'd be curious if anyone sees this differently...
Saturday, September 22, 2007
Friday, September 21, 2007
That's MAJOR Jake to you
Fa-Fa-Fa Friday
Friday is going pretty well. I got word that the Easton wheels that I EP'ed almost a year ago finally made it to the shop, and arranged to have them shipped out to the West Coast. See this picture for why I'm so amped about that:
Full carbon rim, straight pull spokes. No J-bends where I usually break spokes.... lovely. I'm contemplating removing all the decals (pronounced deeeeee-cals) save for the E. Originally I had planned on somehow making other letters to spell out "ERIK", but I think I'm too lazy, and since watching the show "Entourage" 'E' will do just fine. So... not that big a deal, I knew they were coming, why such a 'must write in my blog about them' sort of deal?
The charge on my credit card was over $1,000 for them. What the balls? Supposed to be like 500 bucks. So I call up Easton, and after sitting on hold and listening to the same 30 second clip of a Beethoven invention (which having played it previously made it worse to listen to over and over) for 30 minutes I found out that they forgot to take the 40% off wholesale.... and they'll be cutting me a check for about $400. Even better... I even get the points on my credit card, and I get cash.
And then to top it off, I get back and get an email stating that the irDA usb hub that my old roomate Andy (see his blog for further humorous details on this debacle) bought and sent to me (to the incorrect address that I provided) had finally found its way back to the seller on eBay, and that she was sending it again.
Rocking. Now I just need to come up with a dynamic systems level model for a PEM CHP unit, validate to published data, tweak the code and then graduate and make bank. Rocking.
Full carbon rim, straight pull spokes. No J-bends where I usually break spokes.... lovely. I'm contemplating removing all the decals (pronounced deeeeee-cals) save for the E. Originally I had planned on somehow making other letters to spell out "ERIK", but I think I'm too lazy, and since watching the show "Entourage" 'E' will do just fine. So... not that big a deal, I knew they were coming, why such a 'must write in my blog about them' sort of deal?The charge on my credit card was over $1,000 for them. What the balls? Supposed to be like 500 bucks. So I call up Easton, and after sitting on hold and listening to the same 30 second clip of a Beethoven invention (which having played it previously made it worse to listen to over and over) for 30 minutes I found out that they forgot to take the 40% off wholesale.... and they'll be cutting me a check for about $400. Even better... I even get the points on my credit card, and I get cash.
And then to top it off, I get back and get an email stating that the irDA usb hub that my old roomate Andy (see his blog for further humorous details on this debacle) bought and sent to me (to the incorrect address that I provided) had finally found its way back to the seller on eBay, and that she was sending it again.
Rocking. Now I just need to come up with a dynamic systems level model for a PEM CHP unit, validate to published data, tweak the code and then graduate and make bank. Rocking.
Thursday, September 20, 2007
Cross riding... attracts cross weather?
So I went out for my first cross practice yesterday evening. I literally installed the cleats in the parking lot, then took a few minutes to spin around and practice hopping off and "hopping" on before we did a few laps around the park. It went relatively well.... need to do a lot of work so the whole process of hopping on and off is fluid and seamless, but I have some time, so I'll work on that. I did bite it once... at the bottom of a BIG hill. There is basically a large sand pit at the bottom, and I didn't realize how sloppy it actually was down there. So taking the turn at the bottom of the hill I just washed out... but it looked much more hardcore than it was due to my opening up an old cut. Sweet bloody cross.
Thursday morning... coffee crew ride. 30 miles which is usually relatively chill until the end which picks up the pace a bit, then hits two relatively good hills towards the end. The ride was completely different though. It was raining! Wasn't so bad when we started, and it didn't really even ever rain that hard on us, but the spray and all the gravel kicked up made the ride horrible. It was better out East when the constant rains drove junk off the road. There were tons of little stones in my eyes. (sunglasses were worthless). Oh well. My goal was to make it over Newport Coast Dr. (big climb at the end) with the group, but I didn't even really make it to the bottom with them... thanks rain and stoplights. Maybe it was the cyclocross that brought out the weather.... supposed to have more of it this weekend. bummer.
Thursday morning... coffee crew ride. 30 miles which is usually relatively chill until the end which picks up the pace a bit, then hits two relatively good hills towards the end. The ride was completely different though. It was raining! Wasn't so bad when we started, and it didn't really even ever rain that hard on us, but the spray and all the gravel kicked up made the ride horrible. It was better out East when the constant rains drove junk off the road. There were tons of little stones in my eyes. (sunglasses were worthless). Oh well. My goal was to make it over Newport Coast Dr. (big climb at the end) with the group, but I didn't even really make it to the bottom with them... thanks rain and stoplights. Maybe it was the cyclocross that brought out the weather.... supposed to have more of it this weekend. bummer.
Tuesday, September 18, 2007
Harden the F&^# up
Well the cross bike isn't quite assembled yet... still need a saddle (coming) and cleats (ordered at the shop). Hopefully I'll be able to get it out a few times before the 30th, which will be the first race... that I already regged for.... sahweet.
Don't have much creative to say... but this dude does... the motivation behind Staurt O'Grady's black wristbands at the Tour...
Don't have much creative to say... but this dude does... the motivation behind Staurt O'Grady's black wristbands at the Tour...
Sunday, September 09, 2007
Kona in charge
I got a cross bike! Kona Major Jake. I've got most of the cockpit assembled, but am still waiting for a few essentials in the mail... saddle, brakes... But I'll throw a picture up of the new steed up on the blog when she's all done. For now, suffice it to say... it's going to look HOT.
Took advantage of one of the last homework free weekends by squeezing in about 8.5 hours of riding. I will be taking this week reaaaal easy. Got a nice easy spin planned for early in the week up the Santa Ana river... looks like a cesspool on GoogleEarth, hope it doesn't smell too much.
Also likely switching my emphasis at work a bit... looks like I'll actually be doing work with some stationary PEM units for my MS work. Probably doesn't mean a whole lot to most people, but instead of doing SOFC (Solid Oxide Fuel Cells) which are real big, high temperature units, I'll be doing smaller (though on the large size for PEM) PEM (proton exchange membrane) fuel cells. Obviously most of the basics are the same with these different kinds of systems, but there are some big differences, which I'll highlight real quick. SOFCs have a solid electrolyte and need to be run at high temperatures so that this electrolyte can efficiently conduct oxide ions. The ion migration is from the cathode to the anode..... oxide ions. This differs from PEM fuel cells, which have a polymer (repeating chain of something or other... remember organic chemistry? neither do i... i didn't take it) electrolyte which generally require water to be conductive for protons, which originate from the hydrogen fuel. In PEM systems ion migration is from the anode to the cathode in the form of protons. The net reaction is the same for both types of cells, generally, but the actual chemical mechanisms are different. If you made it this far, then you are a trooper. Give yourself a pat on the back.
So, if you skipped down to here, don't blame you. I'll be working on large-scale PEM fuel cells, which would be placed in someone's house for example, which would provide power for the house 24/7, and the grid when the house doesn't need it (ie during the day when everyone is at work). They would run on pipeline natural gas (gasp! a fossil fuel!) which would be reformed to hydrogen (the clean answer right?? yeaaaaah). They would also provide heating and possibly cooling, through CHP (combined heat and power) equipped units. Basically heat exchangers to take advantage of the fuel cell's heat generation. With big enough units you can actually cool down air if you have hot air, by using a heat pump... but with small systems it becomes too costly, so smaller units would likely just have heating capabilities, which only require an exchanger, not a heat pump.
If you were interested in any of that mumbo jumbo, then good. If not, I didn't tell you you had to read it. If you want to know more, ask.
Off to bed... I rode 80 miles today...
Took advantage of one of the last homework free weekends by squeezing in about 8.5 hours of riding. I will be taking this week reaaaal easy. Got a nice easy spin planned for early in the week up the Santa Ana river... looks like a cesspool on GoogleEarth, hope it doesn't smell too much.
Also likely switching my emphasis at work a bit... looks like I'll actually be doing work with some stationary PEM units for my MS work. Probably doesn't mean a whole lot to most people, but instead of doing SOFC (Solid Oxide Fuel Cells) which are real big, high temperature units, I'll be doing smaller (though on the large size for PEM) PEM (proton exchange membrane) fuel cells. Obviously most of the basics are the same with these different kinds of systems, but there are some big differences, which I'll highlight real quick. SOFCs have a solid electrolyte and need to be run at high temperatures so that this electrolyte can efficiently conduct oxide ions. The ion migration is from the cathode to the anode..... oxide ions. This differs from PEM fuel cells, which have a polymer (repeating chain of something or other... remember organic chemistry? neither do i... i didn't take it) electrolyte which generally require water to be conductive for protons, which originate from the hydrogen fuel. In PEM systems ion migration is from the anode to the cathode in the form of protons. The net reaction is the same for both types of cells, generally, but the actual chemical mechanisms are different. If you made it this far, then you are a trooper. Give yourself a pat on the back.
So, if you skipped down to here, don't blame you. I'll be working on large-scale PEM fuel cells, which would be placed in someone's house for example, which would provide power for the house 24/7, and the grid when the house doesn't need it (ie during the day when everyone is at work). They would run on pipeline natural gas (gasp! a fossil fuel!) which would be reformed to hydrogen (the clean answer right?? yeaaaaah). They would also provide heating and possibly cooling, through CHP (combined heat and power) equipped units. Basically heat exchangers to take advantage of the fuel cell's heat generation. With big enough units you can actually cool down air if you have hot air, by using a heat pump... but with small systems it becomes too costly, so smaller units would likely just have heating capabilities, which only require an exchanger, not a heat pump.
If you were interested in any of that mumbo jumbo, then good. If not, I didn't tell you you had to read it. If you want to know more, ask.
Off to bed... I rode 80 miles today...
Wednesday, September 05, 2007
Riding
I've been out in Cali for a bit now... and I know where the grocery store is, where the closest 173 Starbucks are, and where not to take a #2 on campus. Pretty productive first few weeks. I've also been riding quite a bit. Since I don't really have anything to do in the lab, sometimes I just don't go. Now I'm all physched for when I do have work.... I like getting stuff done (not gettin' 'er done), but when my adviser applauds my simply writing a 4 page fluffer of a thesis proposal, and says its a great start.... its time to slow it down and decrease those expectations.
So yeah... not so much work means a lot of riding. And a lot of riding I did. The first week back on the bike I logged 17 hours. Granted about 9 of those were just real easy spinning around, but still... 17 hours is a good chunk for me. I've done some sweet riding in Santiago Canyon nearby (which sucks when its really hot) and also along the coast (which never sucks). Also been finding some really cool hills to do repeats on later in the year... I'm really pumped for trimming down a bit, and hitting the hills hard in attempts to not be dropped on every climb in every race this year.
Also pumped at the prospect of finally doing a cross season. Despite having two cross bikes in the past, I've never gotten a good ride and a healthy Erik in the same season.... so hopefully this will be it. Got my eyes on a few gems (and a few rustbuckets) on eBay, and also a Major Jake w/ Alpha Q carbon fork locally that I'm checking out tomorrow..... wouldn't that be sweeeeet.
So yeah... not so much work means a lot of riding. And a lot of riding I did. The first week back on the bike I logged 17 hours. Granted about 9 of those were just real easy spinning around, but still... 17 hours is a good chunk for me. I've done some sweet riding in Santiago Canyon nearby (which sucks when its really hot) and also along the coast (which never sucks). Also been finding some really cool hills to do repeats on later in the year... I'm really pumped for trimming down a bit, and hitting the hills hard in attempts to not be dropped on every climb in every race this year.
Also pumped at the prospect of finally doing a cross season. Despite having two cross bikes in the past, I've never gotten a good ride and a healthy Erik in the same season.... so hopefully this will be it. Got my eyes on a few gems (and a few rustbuckets) on eBay, and also a Major Jake w/ Alpha Q carbon fork locally that I'm checking out tomorrow..... wouldn't that be sweeeeet.
Subscribe to:
Posts (Atom)


